ZB G 51103-1987 L01-34沥青烘干清漆
作者:标准资料网 时间:2024-05-18 16:52:41 浏览:8171
来源:标准资料网
基本信息
标准名称: | L01-34沥青烘干清漆 |
中标分类: |
化工 >>
涂料、颜料、染料 >>
涂料 |
替代情况: | HG 2-1554-1984;转化为HG/T 3368-1987 |
发布日期: | |
实施日期: | 2006-03-01 |
首发日期: | |
作废日期: | |
出版日期: | |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 化工 涂料 颜料 染料 涂料
Product Code:SAE AS94
Title:Snap Ring, Non-Controllable Propeller Hub (NONCURRENT Aug 1973)
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope:The purpose of Section I of this document is to specify the requirements for minimum safe performance of an altimeter system in its normal mode of operation on subsonic aircraft. Compliance with this section is a means of assuring that the altimeter system will satisfactorily perform its intended function when exposed to conditions encountered in routine aeronautical operations (normal operation). The instrument system specified shall accept an input of static pressure and in some equipment other inputs that contribute altitude information to provide a visual indication of pressure altitude. If equipped with an automatic correction mechanism, it shall indicate by a positive means when the automatic correction mechanism is not in use. If the static source pressure error compensating mechanism is operational it shall be functional throughout the required operating envelope of the particular aircraft. Each aircraft type has its own static source error data which shall be obtained from the airframe manufacturer's certified data. When a Central Air Data Computer is used in the altimeter system, the CADC shall be certified to its own governing document and the altimeter system (CADC and display) shall comply with the requirements of this document. NOTE: The instrument system specified herein does not include the aircraft pressure lines and pressure sources
基本信息
标准名称: | 食品机械通用技术条件 表面涂漆 |
英文名称: | General specification for food machinery_Technical requirements for paintings |
中标分类: |
食品 >>
食品加工机械 >>
其他食品加工机械 |
ICS分类: |
食品技术 >>
食品工业厂房和
|
替代情况: | 替代SB 228-1985 |
发布部门: | 中华人民共和国商务部 |
发布日期: | 2007-03-28 |
实施日期: | 2007-09-01 |
首发日期: | |
作废日期: | |
提出单位: | 中华人民共和国商务部 |
归口单位: | 全国商业机械标准化技术委员会 |
起草单位: | 浙江工商大学、国家饮食服务机械质量监督检验中心 |
起草人: | 傅玉颖、何阳春、刘旭、洪盳平、焦念雷、王玉波 |
出版社: | 中国标准出版社 |
出版日期: | 2007-09-01 |
页数: | 平装16开 页数:5, 字数:8千字 |
批文号: | 20482-2007 |
适用范围
本标准规定了食品机械产品采用各种涂料进行表面涂漆的技术要求、试验方法、检验规则等。
本标准适用于食品机械产品。
前言
没有内容
目录
没有内容
引用标准
下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T1727 漆膜一般制备法
GB/T1731 漆膜柔韧性测定法
GB/T1732 漆膜耐冲击性测定法
GB/T3181 漆膜颜色标准
GB3186 涂料产品的取样
GB/T5206.1 色漆和清漆 词汇 第1部分:通用术语
GB/T5206.5 色漆和清漆 词汇 第5部分:涂料及涂膜病态术语
GB/T5210 涂层附着力的测定法 拉开法
GB/T6739 涂膜硬度铅笔测定法
GB/T9271 色漆和清漆 标准试板
GB/T9754 色漆和清漆 不含金属颜料的色漆漆膜20°、60°和85°镜面光泽的测定
GB/T13452.2 色漆和清漆 漆膜厚度的测定
所属分类: 食品 食品加工机械 其他食品加工机械 食品技术 食品工业厂房和